SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-137
TRACE Command
LVL2 (number = 10)
specifies tracing for the level-2 dispatcher, scheduler, and state machine. This
information can be traced selectively by also specifying PUSELECT.
LVL3 (number = 11)
specifies tracing for the level-3 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying PUSELECT.
LVL4 (number = 12)
specifies tracing for the level-4 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
LVL5 (number = 13)
specifies tracing for the level-5 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
LVL6 (number = 14)
specifies tracing for the level-6 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
ASM (number cannot be used - for SNAX/APN only)
specifies tracing for the SNAX/APN address space manager state machine and
discarded BIUs. This information can be traced selectively by also specifying
PUSELECT.
BM (number cannot be used - for SNAX/APN only)
specifies tracing for SNAX/APN buffer manager actions.
LINESTD (number = (3, 4, 6, 8, 11, 12, 13, 14))
specifies the following trace keywords: PIU, BIU, FILESYS, MSGSYS, LVL3, LVL4,
LVL5, and LVL6.
ALL (number = (2, 3, 4, 6, 8, 10, 11, 12, 13, 14))
specifies that all options be traced.