SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-138
TRACE Command
SDLC Lines (Device Type 58,5)
For device type 58,5, the select-spec is one or more of the following keywords:
L2DATA (number = 2)
specifies tracing of CIU-to-LIU bus (CLB) traffic.
PIU (number = 3)
specifies tracing of level-3 Path Information Unit (PIU) I/O. This information can be
traced selectively by also specifying PUSELECT.
BIU (number = 4)
specifies tracing of level-4 Basic Information Unit (BIU) I/O. This information can be
traced selectively by also specifying LUSELECT.
keyword
L2DATA
PIU (1)
BIU (2)
FILESYS
MSGSYS
LVL2
LVL3 (3)
LVL4 (4)
LVL5 (4)
LVL6 (4)
ASM (1)
BM
DI
DO
CSSLVL1
CSSLVL2
CCSTATE
CCINTERF
HOSTREQ
PROCENTRY
CCREQ
CCPROCENTRY
LINESTD
CTLRALL
ALL
(1) Can be traced selectively by using PUSELECT.
(2) Can be traced selectively by using LUSELECT.
(3) The state machine can be traced selectively by using PUSELECT.
(4) The state machine can be traced selectively by using LUSELECT.