SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-139
TRACE Command
FILESYS (number = 6)
specifies tracing for level-6 file-system requests and responses.
MSGSYS (number = 8)
specifies tracing for level-4 and SNAX/XF and SNAX/APN I/O subsystem (IOS)
message-system traffic.
LVL2 (number = 10)
specifies tracing for the level-2 dispatcher, scheduler, and state machine.
LVL3 (number = 11)
specifies tracing for the level-3 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying PUSELECT.
LVL4 (number = 12)
specifies tracing for the level-4 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
LVL5 (number = 13)
specifies tracing for the level-5 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
LVL6 (number = 14)
specifies tracing for the level-6 dispatcher, scheduler, and state machine. The
state-machine information can be traced selectively by also specifying LUSELECT.
ASM (number cannot be used - for SNAX/APN only)
specifies tracing for the SNAX/APN address space manager state machine and
discarded BIUs. This information can be traced selectively by also specifying
PUSELECT.
BM (number cannot be used - for SNAX/APN only)
specifies tracing for SNAX/APN buffer manager actions.
DI (number = 17)
specifies tracing for inbound Synchronous Data Link Control (SDLC) frames: that
is, those flowing from the modem to the controller.
DO (number = 16)
specifies tracing for outbound SDLC frames: that is, those flowing from the
controller to the modem.