SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-140
TRACE Command
CSSLVL1 (number = 20)
specifies tracing for controller level-1 state machine events.
CSSLVL2 (number = 21)
specifies tracing for controller level-2 state machine events.
CCSTATE (number = 24)
specifies tracing for X.21 call-control state machine events.
CCINTERF (number = 25)
specifies tracing for the X.21 interface.
HOSTREQ (number = 27)
specifies tracing for SNAX/XF and SNAX/APN requests and responses.
PROCENTRY (number = 28)
specifies tracing of entry into the level-1 and level-2 procedure.
CCREQ (number = 29)
specifies tracing for X.21 call-control requests and responses.
CCPROCENTRY (number = 30)
specifies tracing of entry into the X.21 call-control procedure.
LINESTD (number = (3, 4, 6, 8, 11, 12, 13, 14))
selects the following trace keywords: PIU, BIU, FILESYS, MSGSYS, LVL3, LVL4,
LVL5, and LVL6.
CTLRALL (number = (15, 16, 17, 20, 21, 24, 25, 27, 28, 29, 30))
selects the following trace keywords: DI, DO, CSSLVL1, CSSLVL2, CCSTATE,
CCINTERF, HOSTREQ, PROCENTRY, CCREQ, and CCPROCENTRY.
ALL (number = (3, 4, 6, 8, 11, 12, 13, 14, 15, 16, 17, 20,
21, 24, 25, 27, 28, 29, 30))
specifies that all options be traced.