SNAX/XF and SNAX/APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
13-147
TRACE Command
In the second case, PUSELECT specifies the PU that is subsequently added:
->TRACE LINE $SNAP1, PUSELECT #PU2, TO $BETA.WORK.TRCEDATA
->ADD PU $SNAP1.#PU2, ADDRESS 200, MAXLUS 4, TYPE (13,2), &
->RECSIZE 265
The PU (#PU2) added in the ADD command is not traced.
The situation illustrated above is likewise true when the object is an LU and the option
is LUSELECT, or when a new session is initiated and the option is SESSIONSELECT.