APN Configuration and Management Manual

SCF Commands for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

13-148

VERSION Command

The VERSION command retrieves and displays the subsystem version string. It is a

nonsensitive command.

/ OUT file-spec /

causes any SCF output generated for this command to be directed to the specified

file. file-spec must be a partially or fully qualified file name. If this option is not

specified, the output is sent to the home terminal.

[ SUBSYS ] $SSCP

indicates that the object of this command is the SUBSYS object, $SSCP. For the

SNAX/XF and SNAX/APN subsystems, the SUBSYS keyword can be omitted.

DETAIL

causes detailed information to be displayed. If DETAIL is omitted, only one line of

information is displayed.

Examples

The following examples illustrate the VERSION command with and without the DETAIL

option.

VERSION Command Example

The following example illustrates the VERSION command without the DETAIL option,

and its returned display.

Command Example:

->VERSION SUBSYS $SSCP or VERSION $SSCP

Returned Display:

Detailed VERSION Command Example

The following example illustrates the VERSION command with the DETAIL options and

its returned display.

Command Example:

->VERSION \SYS2.$SSCP, DETAIL

VERSION [ / OUT file-spec / ] [ SUBSYS ] $SSCP [, DETAIL ]

VERSION \SYS1.$SSCP: SNAX - T9064D21^14MAR94^R40_V001^BASE