SNAX/XF and SNAX/APN Configuration and Management Manual
Attributes for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
14-5
APPLID - for SNAX/XF Only
APPLID - for SNAX/XF Only
APPLID defines the ID names of host applications that can be accessed on a
secondary line. In the case of passthrough, when you define an LU on a secondary line
with PASSTHRU ON, LUs on primary lines anywhere in the HP network of NonStop
systems can use the APPLID to establish passthrough LU-LU sessions with host-
resident applications whose ID names match the APPLID. The APPLID attribute can
specify a sequence of from 1 through 99 application names.
If more than one ID name is specified, the list must be enclosed in parentheses. The
format of each application name is from 1 through 8 alphanumeric or special
characters ($, #, or @), the first of which is alphabetic. Each application name must
match the name of the host application defined to VTAM.
This attribute applies only to secondary lines; it has no meaning when assigned to
primary lines.
If one or more names are specified in an ALTER LINE command, these names are
added and any previously specified names are removed.
APPLTYPE
APPLTYPE specifies the type of SNAX/XF or SNAX/APN application program that can
open the service manager by means of this APPL object. This attribute is required.
For SNAX/XF, the valid values and their meanings are as follows:
Default: Null string (" ")
Value: Name or parenthesized list of names, as described in the following text
Objects: LINE
Default: None
Value: 2 | 3 | 4 | 5 | 6 | 10
Objects: APPL
Integer Name Possible Application Types
2 CONFIG Configuration services (CS) of Communications Network
Management (CNM)
3 CNMAPPL CNM application
4 CNMSERV CNM services
5 LUNSAPPL LU Network Services (LUNS) application process that is a TACL
process (an APPL object of this type is needed only to provide a
file name in the APPLFILE attribute)
6 LUNSCRE SNAX Creator or Creator-2 process for use with LUNS
10 CMAPPL Connection-management process in control of the line