APN Configuration and Management Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

351

352

353

354

355

356

357

358

359

360

Attributes for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

14-18

CREATOR



AS/400 systems: If the NonStop node is defined on the AS/400 system, the SCF

CPNAME attribute of the SUBSYS object must match the specification for the

RMTCPNAME in the AS/400 Controller Description.



PS/2 systems running OS/2: The SCF CPNAME attribute of the SUBSYS object

must match the Partner Node Name in the Configure Connection definition.



Systems using NCP and VTAM: For the parameters that correspond to CPNAME

and the circumstances under which they must match CPNAME, consult the IBM

documentation for the version and release of VTAM and NCP on your system.

CREATOR

CREATOR specifies the APPL object subdevice name associated with the SNAX

Creator or Creator-2 (LUNSCRE) application process. Alphabetic characters in the

name can be specified in uppercase or lowercase. SNAX converts all lowercase letters

to uppercase.

For SNAX/XF

This process uses the subdevice name specified in the CREATOR attribute when it

issues an open request to the service-manager process.

For SNAX/APN

The subdevice name specified for this attribute must match the subdevice-name part of

the APPL object name configured in an ADD APPL command for this SNAX/APN

subsystem. When prefixed with the system name, the APPL object name must also

match the subdevice (SU) name specified in the SNAX Creator-2 subsystem

configuration for the Creator-2 process to be used.

For SNAX/APN, the CREATOR attribute is valid only for the TLOGMGR LU—that is,

when the PROTOCOL attribute is set to LOGON. It is required for the TLOGMGR LU.

This attribute can be removed with the ALTER APPL command by specifying a null

string (" ") as the value. However, for SNAX/APN, note that you must have at least one

LU configured with this attribute (one TLOGMGR LU) if you are using the extended

logon facility (XLF) for logons from remote 3270 terminals.

Default: None

Value: String consisting of a pound sign (#) followed by 1 through 7

alphanumeric characters, the first of which must be alphabetic

Objects: for SNAX/XF - APPL; for SNAX/APN - LU