APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

14-20

DEVTYPE

For IBM 3278-A1K/A2K display stations, SNAX/XF performs HP NonStop

Kanji/EBCDIC Kanji translation on all Kanji data sent to the terminal (note that the user

cannot enter Kanji data using a 3278 terminal). For IBM 5578-001/002 display stations,

SNAX/XF performs HP NonStop Kanji/EBDIC Kanji translation on all Kanji data sent to

and received from the terminal. For Fujitsu F-6652- A/C display stations, SNAX/XF

performs HP NonStop Kanji/Fujitsu Kanji translation on all Kanji data sent to and

received from the terminal. For IBM 32 83-52/53, 5227-11, 5553-B01/B02, 5557-B01,

and 5577-B01 printers, SNAX/XF translates into IBM Kanji all HP NonStop Kanji data

sent by the application. For Fujitsu F-6654 printers, SNAX/XF translates HP NonStop

Kanji into Fujitsu Kanji.

For SNAX/APN–EN:

No Kanji translation is performed in SNAX/APN-EN. Instead, the translation is

performed by applications such as the Pathway TCP or Spooler. These applications

determine what translation is required by issuing a Setmode 144 to the LUs subdevice.

The following values are returned in the Setmode 144 response, last params[1], based

on the value of the LU’s CHARACTERSET and DBCS settings:

DEVTYPE

DEVTYPE specifies the device type and model number of the terminal containing the

IBM LU.

This attribute is required only when the LU is subordinate to a primary line, and then

only when the LU’s protocol is CRT, PRT, or ITI. The DEVTYPE attribute has no

CHARACTERSET ASCII 0

CHARACTERSET EBCDIC 9

CHARACTERSET KATAKANA 1

DBCS NONE 0

DBCS IBMKANJI 2

DBCS IBMMIXED 3

DBCS JEFKANJI 5

DBCS IBMADMIX 1

Default: None

Value: See Table 4-2

Objects: LU