APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

14-63

SSCPID - for SNAX/XF Only

SSCPID alters the subsystem services control point identifier (SSCP ID) of the

SNAX/XF subsystem. The SSCP ID identifies the SSCP (in this case, the SNAX/XF

service–manager process) that issues the ACTPU command, and is contained in

bytes 3 through 8 of the SNA ACTPU command. Any alterations to this attribute

must be made before the service manager is started.

STATIC - for SNAX/XF Only

STATIC specifies whether the LU modified by this attribute operates in static

passthrough mode. If STATIC ON is specified, the LU is permanently assigned to a

particular static passthrough path. If STATIC OFF is specified, the LU can be

permanently subordinated to applications on the NonStop system, or it can be

assigned to passthrough sessions on a dynamic basis. The following considerations

apply when specifying this attribute:



The STATIC attribute only applies to LUs on secondary lines.



If STATIC ON is specified, the application must also specify the ASSOCIATE and

PASSTHRU attributes.

This attribute can also be overridden by an LU Network Services (LUNS) ESS record,

but only when STATIC OFF is specified.

Default: 0

Value: 0 - 65535

Objects: SUBSYS

Default: OFF

Value: ON | OFF

Objects: LU