SNAX/XF and SNAX/APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
14-70
TPF - for SNAX/APN Only
TPF - for SNAX/APN Only
TPF (Transmission Priority Field), as defined by SNA, specifies the priority of sessions
created on this LU relative to the priority of sessions on other LUs. TPF is an optional
attribute.
The following values are valid for the TPF attribute:
For LUs used for APPC, the priority configured in the TPF attribute is overridden if a
TPF vector has been received or sent in a BIND.
TRMAXIN
TRMAXIN is replaced by LNMAXIN on page 14-29. For backward compatibility with
existing configurations, SCF accepts TRMAXIN on the ADD or ALTER PU command,
but you are encouraged to use LNMAXIN for new and altered Token-Ring
configurations. The SCF INFO PU, DETAIL always displays LNMAXIN; it no longer
displays TRMAXIN.
TRMAXOUT
TRMAXOUT is replaced by LNMAXOUT on page 14-29. For backward compatibility
with existing configurations, SCF accepts TRMAXOUT on the ADD or ALTER PU
command, but you are encouraged to use LNMAXIN for new and altered Token-Ring
configurations. The SCF INFO PU, DETAIL always displays LNMAXOUT; it no longer
displays TRMAXOUT.
TRMAXOUTINCR
TRMAXOUTINCR is replaced by LNMAXOUTINCR on page 14-29. For backward
compatibility with existing configurations, SCF accepts TRMAXOUTINCR on the ADD
or ALTER PU command, but you are encouraged to use LNMAXOUTINCR for new
and altered Token-Ring configurations. The SCF INFO PU, DETAIL always displays
LNMAXOUTINCR; it no longer displays TRMAXOUTINCR.
Default: MED
Value: LOW | MED | HI
Objects: LU
LOW specifies that sessions created on this LU have a low priority relative to other
sessions.
MED specifies that sessions created on this LU have a medium priority relative to
other sessions.
HI specifies that sessions created on this LU have a high priority relative to
other sessions.