APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

14-71

TRMAXRETRY

TRMAXRETRY is replaced by LNMAXRETRY on page 14-30. For backward

compatibility with existing configurations, SCF accepts TRMAXRETRY on the ADD or

ALTER PU command, but you are encouraged to use LNMAXRETRY for new and

altered Token-Ring configurations. The SCF INFO PU, DETAIL always displays

LNMAXRETRY; it no longer displays TRMAXRETRY.

TRRMTADDR

TRRMTADDR is replaced by LNRMTADDR on page 14-30. For backward compatibility

with existing configurations, SCF accepts TRRMTADDR on the ADD or ALTER PU

command, but you are encouraged to use LNRMTADDR for new and altered Token-

Ring configurations. The SCF INFO PU, DETAIL always displays LNRMTADDR; it no

longer displays TRRMTADDR.

TRSSAP

TRSSAP is replaced by LNSSAP on page 14-30. For backward compatibility with

existing configurations, SCF accepts TRSSAP on the ADD or ALTER PU command,

but you are encouraged to use LNSSAP for new and altered Token-Ring

configurations. The SCF INFO PU, DETAIL always displays LNSSAP; it no longer

displays TRSSAP.

TRT1

TRT1 is replaced by LNT1 on page 14-31. For backward compatibility with existing

configurations, SCF accepts TRT1 on the ADD or ALTER PU command, but you are

encouraged to use LNT1 for new and altered Token-Ring configurations. The SCF

INFO PU, DETAIL always displays LNT1; it no longer displays TRT1.

TRT2

TRT2 is replaced by LNT2 on page 14-31. For backward compatibility with existing

configurations, SCF accepts TRT2 on the ADD or ALTER PU command, but you are

encouraged to use LNT2 for new and altered Token-Ring configurations. The SCF

INFO PU, DETAIL always displays LNT2; it no longer displays TRT2.

TRTI

TRTI is replaced by LNTI on page 14-31. For backward compatibility with existing

configurations, SCF accepts TRTI on the ADD or ALTER PU command, but you are

encouraged to use LNTI for new and altered Token-Ring configurations. The SCF

INFO PU, DETAIL always displays LNTI; it no longer displays TRTI.