SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX Quickstart and Overview
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
1-5
Task Five: Define Custom SET, ESS, and BIND
Tables (if required)
Task Five: Define Custom SET, ESS, and BIND Tables (if
required)
SNAX uses three tables at session establishment:

Session establishment (SET) table
The SET table associates ESS table names and BIND table names with source
files containing these tables.
Figure 1-1. SNAX/XF and SNAX/APN Object Hierarchies
Notes.
1. For SNAX/XF, a pool of PU and LU objects (called switched floating PU and LU objects)
can be subordinated to the SUBSYS object for use on switched lines when a connection is
established.
2. For SNAX/XF, the PU and LU objects represent remote PUs and LUs on primary lines and
local PUs and LUs on secondary lines.
3. For SNAX/APN, both local and remote PU and LU objects are configured.
APPL Object
SUBSYS
Object
LINE
Object
PU Object
LU Object
SESSION
Object
Switched
Floating PU
Object
Switched
Floating LU
Object
SUBSYS
Object
LINE
Object
Local PU
Object
Local LU
Object
SESSION
Object
Remote
PU Object
Remote LU
Object
SESSION
Object
SNAX/XF Objects
SNAX/APN Objects
PROCESS
Object
PROCESS
Object
APPL Object
VST101.vsd