SNAX/XF and SNAX/APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
14-73
TYPE (Local LU Objects) - for SNAX/APN
All of these integer values are specified following the number 14 and a command,
surrounded by parentheses, such as in the value specified TYPE (14,0). The number
14 indicates the device type for an LU. This attribute is required; there is no default.
The subtype is also required.
TYPE (Local LU Objects) - for SNAX/APN
When applied to local LU objects, TYPE specifies the device type (always 14) and
subtype for a local LU. For SNAX/APN, the subtype must always be specified as 21.
3650 Retail Store System
3660 Supermarket System
3730 Distributed Office Communication System
3790 Processor System
4700 Financial Communication System
8100 Processor System
1 defines the formats and protocols for SNA support of a Remote Job Entry
(RJE) workstation operating in a batch environment.
2 defines the session rules for communicating in an interactive display
environment with devices attached to a 3270 cluster controller or a T6600
controller.
3 defines the session rules for communicating with printer devices attached to
a 3270 cluster controller.
4 defines the session rules for communicating with data processing and word
processing media support devices attached to a cluster controller.
21 is an internal HP value that applies only when the PROTOCOL attribute is
SNALUXS.
Default: None
Value: ( 14, 21 )
Objects: LU