APN Configuration and Management Manual

Attributes for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

14-77

X21T3ATIMEOUT

This attribute only applies to unsupported X.21 switched lines. The attribute description

is given because the attribute appears in SCF INFO LINE, DETAIL displays.

X21T3ATIMEOUT specifies the T3A time limit that the X.21 DTE uses when waiting for

a DCE response during call establishment. T3A represents the T3A timer. This

attribute applies only to SDLC lines.

The valid range of values for this attribute is 0 through 10 minutes, 5 seconds, and 35

hundredths of a second (0 through 10:5.35). If the value specified is 0, ADCCP does

not use the specific T3A timer during the X.21 call establishment process.

X21T3BTIMEOUT

This attribute only applies to unsupported X.21 switched lines. The attribute description

is given because the attribute appears in SCF INFO LINE, DETAIL displays.

X21T3BTIMEOUT specifies the T3B time limit that the X.21 DTE uses when waiting for

a DCE response during call establishment. T3B represents the T3B timer. This

attribute applies only to SDLC lines.

The valid range of values for this attribute is 0 through 10 minutes, 5 seconds, and 35

hundredths of a second (0 through 10:5.35). If the value specified is 0, ADCCP does

not use the specific T3B timer during the X.21 call establishment process.

X21T4TIMEOUT

This attribute only applies to unsupported X.21 switched lines. The attribute description

is given because the attribute appears in SCF INFO LINE, DETAIL displays.

X21T4TIMEOUT specifies the T4 time limit that the X.21 DTE uses when waiting for a

DCE response during call establishment. T4 represents the T4 timer. This attribute

applies only to SDLC lines.

Default: 2 seconds

Value: 0 - 10:55.35

Objects: LINE

Default: 1 minute

Value: 0 - 10:55.35

Objects: LINE

Default: 2 seconds

Value: 0 - 10:55.35

Objects: LINE