SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-10
FILTER Command
The following example shows the information displayed for a service manager trace
record when the SPI option is set to ON:
The information down through the hexadecimal, ASCII, and EBCDIC data display is
shown regardless of the SPI and SPIDETAIL flag settings. The SPI token information
following the data display appears only when the SPI flag is set to ON.
The left-hand column of the display gives the standard DSM terms for the SPI tokens
in the buffer, as explained in the SPI Programming Manual. Numbers in parentheses
are displayed for tokens for which no DSM label templates are currently provided in the
DDL files on the NonStop system; in this example, no templates were available for the
ZCOM- tokens. The right-hand column of the display gives the token values. If a token
value is an enumerated value, the right-hand column also gives the associated
numeric value in parentheses.

To display token information for SPI requests and responses labeled with the DDL
names (and to disable HEADING or AS attribute information for SPI requests and
responses), use the following PTrace command:
FILTER SPIDETAIL ON
01/14/93 19:00:38.574969 >000.000000 #12
Record Type : 000 RQRCVD^TRACE^ID
SVM +%52346 LISTEN WRITEREAD
LCB: 027610 P1-P6: 140403 000474 000212 012000 000145 000000
LCB.LTRAN: #0138 PID: 03,111 ASCII EBCDIC
FFE4 0F3C 0084 5441 4E44 454D 2020 0024 ! < TANDEM $! U d + (
!
431E 0000 4300 0000 0708 FE21 0003 000D !C C ! !
!
000A 0000 0710 FE46 FFF8 08FF 1F41 0000 ! F A ! 8
!
0000 0000 0000 007A 01FF 2706 0005 2453 ! z ' $S! :
!
4E41 3100 1920 FF0D 5C20 2020 2020 2020 !NA1 \ !+ *
!
2453 5343 5020 2020 2020 2020 2020 2020 !$SSCP ! &
!
2020 2020 2020 2020 1708 1F40 0000 0000 ! @ !
!
055D 4A80 0B02 FF07 0003 07FF 1F41 000A ! ]J A ! )
!
245A 3332 3120 0D94 FFFF !$Z321 ! ! m
!
Header Type: 0
Checksum: F
Command: 3
Last Error: token not found (-8)
Last Error Tkncode: (8,255,8001)
Max Field Version: C00
Max Responses: 10
Object Type: 13
Server Version: 0
SSID: TANDEM.SNAX.C30
Used Byte Length: 138
Buffer Byte Length: 3900
(1,255,9990):* "$SNA1"
Manager: $SSCP
(23,8,8000): 00:01:30.000.000
Allow Type: allow warnings (3)
(7,255,8001):- 36 90 51 50 49 32 13 148 255 255