SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-26
004: BIU^TRACE^ID (BIU Out)
request or RU: nnnnnn
if present, gives additional information from the beginning of the RU. If the BIU
contains an SNA request (or a response to an SNA request) such as ACTPU,
ACTLU, or BIND, the abbreviation for the request appears here. If the BIU
contains invalid or unrecognized data, the display shows RU: followed by the first
six bytes of the RU in hexadecimal. If this is a response that includes sense data,
as in this example, or if the BIU contains FMD data and the FI bit is not set, this
field does not appear.
0100 0000 0001 8F90 ...
is the first six bytes of the SNAX header followed by the contents of the BIU (RH
and RU).
0100 0000 0001
is the first six bytes of the SNAX header.
8F90 00
is the RH.
08 3100 ...
is the RU.
004: BIU^TRACE^ID (BIU Out)
This trace record contains the outbound Basic Information Unit (BIU) sent by SNAX
level 4 to SNAX level 3.
The BIUthat is, the request/response header (RH) followed by the request/response
unit (RU)is preceded by the first six bytes of the SNAX header described in the
SNAX/XF Application Programming Manual and the SNAX/APN Application
Programming Manual.
Record Type : 004 BIU^TRACE^ID
BIU Out OAF: #002 BIU bytes: 95
REQ FMD BC EC DR1I BBI
0000 0000 0001 0380 8035 471D 2D54 6869 ! 5G -Thi!
!
7320 6973 2033 3237 3020 626C 6F63 6B20 !s is 3270 block ! %?
, !
6E75 6D62 6572 3A20 3120 6F66 2061 2074 !number: 1 of a t!> _ ?
/ !
6F74 616C 206F 6620 3120 0011 4830 0054 !otal of 1 H0 T!? /% ?
!
6869 7320 6973 206F 6E6C 7920 6120 7465 !his is only a te! ?>%' /
!
7374 206D 6573 7361 6765 201D 4813 00 !st message H ! _ /
!