SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-30
012: L6^SCHED^TRACE^ID
CRT -> L5-T2
identifies the source and destination of the request within SNAX. In this case, the
request is from the CRT protocol to level 5 (for PU type 2).
L5^OutReq
identifies the internal level-5 request being dispatched.
Msg: %nnnnnn.nnnnnn
is information for HP internal use.
RscID: %nnnnnn
is information for HP internal use.
012: L6^SCHED^TRACE^ID
This trace record indicates that the scheduler within the line handler has dispatched a
request to SNAX level 6 for processing.
DPCL:
indicates that an internal procedure was called within SNAX to dispatch the
request.
TSIOS -> CRT
identifies the source and destination of the request within SNAX. In this case, the
request is from the SNAX I/O subsystem in the line handler, and it is to be sent to
the CRT protocol.
L6^FSReq
identifies the internal level-6 request being dispatched.
Msg: %nnnnnn.nnnnnn
is information for HP internal use.
RscID: %nnnnnn
is information for HP internal use.
Record Type : 012 L6^SCHED^TRACE^ID
DPCL: TSIOS -> CRT L6^FSReq
Msg: %000002.070320 RscID: %000002