SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-32
016: L4^DISPQ^TRACE^ID
Q IO:
identifies the internal queue to which this message has been added. The queue
identifier is one of the following:
L3 -> L2
identifies the source and destination of the request within SNAX. In this case, the
request is from level 3 to level 2.
L2^Write
identifies the internal request being queued.
Msg: %nnnnnn.nnnnnn
is information for HP internal use.
RscID: %nnnnnn
is information for HP internal use.
016: L4^DISPQ^TRACE^ID
This trace record indicates that the line handler has queued a message from SNAX
level 4 for eventual internal dispatch.
Q NRM:
identifies the internal queue to which this message has been added. The queue
identifier is one of the following:
L4 -> L3
identifies the source and destination of the request within SNAX. In this case, the
request is from level 4 to level 3.
IO I/O queue (highest priority)
EXP Expedited queue (next-highest priority)
NRM Normal queue (lowest priority)
Record Type : 016 L4^DISPQ^TRACE^ID
Q NRM: L4 -> L3 L3^Send^Biu
Msg: %000022.072156 RscID: %144002
IO I/O queue (highest priority)
EXP Expedited queue (next-highest priority)
NRM Normal queue (lowest priority)