APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

15-34

018: L6^DISPQ^TRACE^ID

This trace record indicates that the line handler has queued a message from SNAX

level 6 for eventual internal dispatch.

Q EXP:

identifies the internal queue to which this message has been added. The queue

identifier is one of the following:

CRT -> L5-T2

identifies the source and destination of the request within SNAX. In this case, the

request is from the CRT protocol to level 5 (for PU type 2).

L5^OutReq

identifies the internal request being queued.

Msg: %nnnnnn.nnnnnn

is information for HP internal use.

RscID: %nnnnnn

is information for HP internal use.

019: L1^STATE^TRACE^ID

This trace record indicates a state transition within the level-1 state machine. It applies

to line type 58,5. Each of these line types has a different state machine.

The contents of this trace record are for HP internal use.

Record Type : 018 L6^DISPQ^TRACE^ID

Q EXP: CRT -> L5-T2 L5^OutReq

Msg: %000000.000000 RscID: %000002

IO I/O queue (highest priority)

EXP Expedited queue (next-highest priority)

NRM Normal queue (lowest priority)

Record Type : 019 L1^STATE^TRACE^ID

L1 State: %000144 Event: #01