APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

15-36

034: MS^LINK^TRACE

This trace record contains the results of a message-system LINK for a request sent by

the line handler to the X25AM I/O process. It applies only to X.25 lines.

MSPROCS

is an identifier for HP internal use.

LINK

indicates that the message-system LINK function was invoked.

TS -> X25

identifies the source and destination of the message-system request. For this

trace-record type, the source is always TS (the line handler), and the destination is

always X25 (X25AM).

TSX25^SENDDATA

identifies the type of service being requested by the line handler, which is one of

the following:

LCB: nnnnnn

gives the address of the message-system control block (MSGCB) within SNAX.

This address matches the MSGCB address displayed in the LDONE trace record

for the completion of this LINK request.

Record Type : 034 MS^LINK^TRACE

MSPROCS LINK TS -> X25 TSX25^SENDDATA

LCB: 041742 P1-P6: 140460 000026 000001 000002 000024 000001

LCB.LTRAN: #0020 LCB.LLIM: #0020 ASCII EBCDIC

0000 2D00 0000 0002 6B80 0011 0101 0500 ! - k ! ,

0000 0000 ! !

TSX25^ALLOW^CALLIN Allow call-in

TSX25^ATTACH Attach

TSX25^CALLACCEPT Call accept

TSX25^CALLCLEAR Call clear

TSX25^CALLOUT Call out

TSX25^DETACH Detach

TSX25^SENDDATA Send data