SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-38
036: MS^LDONE^TRACE
Matching Record Number Is: #nnnnn
if present, identifies the record number (in this trace file) of the trace record for the
corresponding message-system LISTEN. If no matching record is found,
*** Matching Record Number Not Found *** is displayed.
LCB: nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the trace record for the
corresponding request from X25AM.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the MSGCB. These fields are for HP
internal use.
LCB.LTRAN: #nnnn
has no meaning for D-series systems.
LCB.LLIM: #nnnn
has no meaning for D-series systems.
0016 ...
is the data in the WRITELINK message. This data is for HP internal use.
036: MS^LDONE^TRACE
This trace record contains a message-system LDONE message received by the line
handler from the X25AM I/O process, confirming that X25AM has received and
processed a message previously sent via LINK. The corresponding LINK request is
recorded by trace-record type 34. This trace-record type applies only to X.25 lines.
MSPROCS
is an identifier for HP internal use.
LDONE
indicates that the message-system LDONE function was invoked.
FEOK
is the literal associated with the file-system error number returned in this case.
FEOK indicates that no errors or warnings occurred.
Record Type : 036 MS^LDONE^TRACE
MSPROCS LDONE FEOK FOR TSX25^SENDDATA
Matching Record Number Is: #00114
LCB: 041742 P1-P6: 000000 000026 000001 000002 000000 000001
LCB.LTRAN: #0000 LCB.LLIM: #0020