SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-39
038: MS^LCAN^OUTGOING^TRACE
TSX25^SENDDATA
identifies the corresponding level-2 request, which is one of the following:
Matching Record Number Is: #nnnnn
if present, identifies the record number (in this trace file) of the trace record for the
corresponding message-system LINK. If no matching record is found, *** Matching
Record Number Not Found *** is displayed.
LCB: nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the corresponding LINK
trace record.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the MSGCB. These fields are for HP
internal use.
LCB.LTRAN: #nnnn
has no meaning for D-series systems.
LCB.LLIM: #nnnn
has no meaning for D-series systems.
nnnn nnnn ...
if present, is the data in the LDONE message. This data is for HP internal use.
038: MS^LCAN^OUTGOING^TRACE
This trace record indicates that SNAX has invoked the message-system LCAN function
to cancel all outgoing send-data requests (recorded by trace-record type 34 or 41) that
TSX25^ALLOW^CALLIN Allow call-in
TSX25^ATTACH Attach
TSX25^CALLACCEPT Call accept
TSX25^CALLCLEAR Call clear
TSX25^CALLOUT Call out
TSX25^DETACH Detach
TSX25^SENDDATA Send data