SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-40
039: MS^INCOMING^REQ^TRACE
have been sent by SNAX level 2 to the X25AM I/O process for a particular path (PU-to-
X25AM-subdevice association). It applies only to X.25 lines.
MSPROCS
is an identifier for HP internal use.
LCAN
indicates that the message-system LCAN function was invoked.
OUTGOING
indicates that all outgoing send-data requests for this path are being canceled.
LCB: nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the LDONE trace record
for the completion of this LCAN request.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the MSGCB. These fields are for HP
internal use.
LCB.LTRAN: #nnnn
has no meaning for D-series systems.
LCB.LLIM: #nnnn
has no meaning for D-series systems.
039: MS^INCOMING^REQ^TRACE
This trace record contains an incoming request received by SNAX level 2 from the
X25AM I/O process. It applies only to X.25 lines.
Record Type : 038 MS^LCAN^OUTGOING^TRACE
MSPROCS LCAN OUTGOING
LCB: 041742 P1-P6: 000000 000026 000001 000002 000000 000001
LCB.LTRAN: #0000 LCB.LLIM: #0000
Record Type : 039 MS^INCOMING^REQ^TRACE
L2 MSCB RECEIVED X25 -> TS X25TS^RECDATA - XID
REQID: 000220 000221 P1-P6: 140461 000026 000001 000002 000030
000000
REQ SIZE: #0024 MAX REPLY SIZE: #0024 ASCII EBCDIC
0100 1214 FF2F FFF2 0000 0000 010C 0000 ! / ! 2
!
0000 0700 0166 6600 ! ff !
!