APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

15-41

039: MS^INCOMING^REQ^TRACE

indicates that this is a request reported by SNAX level 2.

MSCB RECEIVED

indicates that level 2 received a message through its internal message interface.

X25 -> TS

identifies the source and destination of the message-system request. For this

trace-record type, the source is always X25 (X25AM) and the destination is always

TS (the line handler).

X25TS^RECDATA

identifies the type of request, which is one of the following:

If X25TS^RECDATA is displayed, additional communication between the

processes is done using the first word of the buffer, and the next field further

identifies the communication, as described below.

XID

for trace records displaying request type X25TS^RECDATA, further identifies the

type of incoming request from X25AM. This field has one of the following values:

REQID: nnnnnn nnnnnn

is a number used by the line handler to identify this request. This number matches

the first REQID displayed in the type 40 trace record for the corresponding reply.

X25TS^CALLCLEAR Call clear

X25TS^RECDATA Data

Data Data

Disc Disconnect

Disc^Rsp Disconnect response

Frame^Rej Frame reject

Req^Disc Request for disconnect

Setmode SETMODE

Setmode^Rsp SETMODE response

Test Test message

XID Exchange identification