SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-43
040: MS^REPLY^TRACE
X25TS^RECDATA
identifies the type of request being replied to, which is one of the following:
REQID: nnnnnn nnnnnn
is the number used by the line handler to identify the request being replied to.
This number matches the REQID displayed in the type 39 trace record for the
corresponding request.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the message-system control block
(MSGCB) for the request being replied to. These fields are for HP internal use.
OUTGOING REPLY
introduces information about the reply.
REPLY DATA SIZE #nnnn
is the number of bytes of data in the reply.
REQID: nnnnnn nnnnnn
is the number used by the line handler to identify the request and its corresponding
reply. This number matches the REQID for the corresponding request, as
displayed above and in the corresponding type 39 trace record.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the message-system control block
(MSGCB) for the reply. These fields are for HP internal use.
nnnn nnnn ...
if present, is the data in the reply. This data is for HP internal use.
X25TS^CALLCLEAR Call clear
X25TS^RECDATA Data