APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

15-45

042: MS^SEND^DATA^COMPLETION^TRACE

Data

for trace records displaying request type TSX25^SENDDATA, further identifies the

type of request being sent to X25AM. This field has one of the following values:

REQID: nnnnnn nnnnnn

is a number used by the line handler to identify this request. This number matches

the first REQID displayed in the type 42 trace record for the corresponding reply.

P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn

gives the values of the control fields in the message-system control block

(MSGCB). These fields are for HP internal use.

WRITE COUNT: #nnnn

gives the length, in bytes, of the data sent in the request.

READ COUNT: #nnnn

gives the maximum length, in bytes, allowed for incoming reply data.

0000 2D00 ...

if present, is the outgoing data. This data is for HP internal use.

042: MS^SEND^DATA^COMPLETION^TRACE

This trace record contains a reply received by SNAX level 2 from the X25AM I/O

process, acknowledging the completion of a send-data request to X25AM recorded by

trace-record type 41. It applies only to X.25 lines.

indicates that this is a request reported by SNAX level 2.

Data Data

Disc Disconnect

Setmode SETMODE

Test Test message

XID Exchange identification

Record Type : 042 MS^SEND^DATA^COMPLETION^TRACE

L2 MSCB LDONE

ORIGINAL REQUEST TS -> X25 TSX25^SENDDATA

REQID: 000015 127512 P1-P6: 140460 000026 000001 000002 000024

000001

RESPONSE RECEIVED: FEOK

REQID: 000015 127512 P1-P6: 000000 000026 000001 000002 000000

000001