SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-47
043: MS^OPEN^TRACE
REQID: nnnnnn nnnnnn
is the number used by the line handler to identify the request and its corresponding
reply. This number matches the REQID for the corresponding request, as
displayed above and in the corresponding type 41 trace record.
P1-P6: nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn nnnnnn
gives the values of the control fields in the message-system control block
(MSGCB) for the reply. These fields are for HP internal use.
nnnn nnnn ...
if present, is the data in the reply. This data is for HP internal use.
043: MS^OPEN^TRACE
This trace record indicates the internal establishment by SNAX of a path to a
destination. This path forms an association between a SNAX physical unit (PU) and
an X25AM subdevice. This trace-record type applies only to X.25 lines.
L2
indicates that this is a request reported by SNAX level 2.
MSPROCS
is an identifier for HP internal use.
OPEN
identifies the internal open of a path.
DESTINATION PROCESS NAME: \SNACLX $X25AM1 #A1P5
gives the associated X25AM subdevice name.
SYNCDEPTH nn
gives the sync-depth parameter value in the OPEN request.
RESULT FEOK
gives the literal associated with the file-system error number returned, in this case,
on the OPEN request. FEOK indicates that no errors or warnings occurred.
Record Type : 043 MS^OPEN^TRACE
L2 MSPROCS OPEN
DESTINATION PROCESS NAME: \SNACLX $X25AM1 #A1P5
SYNCDEPTH 02 RESULT FEOK
LDEV 39 SYSNUM 249 LFILE ID 0013