APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

15-49

088: SNAXFLAGS^TRACE^ID

This trace record is created every time one of the line state flags (called SNAXFLAGS)

changes state. The formatted trace record is as follows:

SNAXFLAGS for line with old CCB at %005250

references the CCB address of this line.

set in T305

is an identifier for HP internal use.

Flag

refers to the line state flag name.

OLD

refers to the state of the particular flag.

NEW

is the present state of the particular flag.

indicates that this particular flag has changed state.

105: DXX^FILEREQ^

This trace record contains a file-system request sent by the application to SNAX level

Record Type: 88 SNAXFLAGS^TRACE^ID

SNAXFLAGS for line with old CCB at %005250, set in T305

Flag Old New Flag Old New

Line^Start^Connect 3 3 * Line^Down^Recvd T F

Line^Start^Issued T T Line^IO^Enabled F F

Enable^Connect T T Line^Disconnect^Needed F F

Record Type : 105 DXX^FILEREQ^

ITI File Request SWITCH OAF: #002

MSGCB: %000017.020616

LINKER: #24,#8874 LISTENER: #16,#0016

0000 0000 0000 8000 0000 0000 0000 0000 ! !

616C 6C6F 7720 616C !allow al !/%%? /%

6C20 6572 726F 7273 81FE 0000 0000 !l errors !% ? a