SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-50
106: DXX^FILEREP^
ITI
identifies the protocol that initiated the request. This field displays one of the
following:
File Request
indicates that this trace record contains information about a file-system request.
SWITCH
identifies the file-system request made on behalf of the application.
OAF: #nnn
gives the value of the origin address field.
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the trace record for the
corresponding reply.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
0000 0000 ...
is the contents of the file-system request.
106: DXX^FILEREP^
This trace record contains a reply sent by SNAX level 6 to the application in the form of
a message-system WRITELINK.
CRT CRT protocol
CRT30 CRT protocol for 65xx devices
ITI ITI protocol
ITI30 ITI protocol for 65xx devices
PRT Printer protocol
SNALU SNALU protocol
Record Type : 106 DXX^FILEREP^
ITI WRITELINK FEMODEMERR FOR Request: #0146 CLOSE
MSGCB: %000017.020616 Matching Record Number Is: #00268
LINKER: #24,#4198 LISTENER: #16,#0000
0000 0000 0000 8000 0000 0000 0000 0000 ! !
!
4853 4342 0002 0008 !HSCB !
!