SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-53
127: DXX^TS^TO^TS
TS -> SSCP
identifies the source and destination of the request within SNAX. For this trace-
record type, the source is always TS (the line handler), and the destination is
always SSCP (the service manager).
WRITE
identifies the type of service being requested by the line handler. This information
is for HP internal use.
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the LDONE trace record
for the completion of this LINK request.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
0000 0000 ...
if present, is the data in the LINK message. If SNA abbreviations are displayed
above the data, indicating that the message contains a PIU, the breakdown of this
data is as explained in the description of trace records 3 and 103 (PIU In).
127: DXX^TS^TO^TS
This trace record contains a message-system request from one line-handler process to
another. This could be a message sent to a remote line handler—for example, an
outgoing passthrough message—or a checkpoint request sent by the primary line-
handler process to its backup process.
LINK
indicates that the message-system LINK function was invoked. In this type of trace
record, LINK identifies the request as a passthrough message or other message
sent to a remote line handler.
If the trace record contains a checkpoint request, TS CHECKPOINT is displayed.
LINK TS -> TS
identifies the source and destination of the request within SNAX: line handler (TS)
to line handler.
Record Type : 127 DXX^TS^TO^TS
LINK TS -> TS CONTROL
MSGCB: %000000.007614
LINKER: #00,#3212 LISTENER: #80,#0080