SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-55
129: DXX^PASSTHRU^MSG
SSCP -> TS
identifies the source and destination of the request within SNAX. For this trace-
record type, the source is always SSCP (the service manager) and the destination
is always TS (the line handler).
CONTROL
identifies the service being requested by the service manager. This information is
for HP internal use.
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the WRITELINK or
LDONE trace record for the incoming message.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
0003 0000 ...
if present, is the incoming data retrieved via the LISTEN function.
129: DXX^PASSTHRU^MSG
This trace record contains a passthrough message from a remote line-handler process.
It is generated after the LISTEN function is invoked, during processing of an incoming
message.
REQUEST
indicates that this trace record contains information about a request.
TS -> TS
identifies the source and destination of the request within SNAX. For this trace-
record type, both source and destination are always TS (the line handler),
indicating that this is a request occurring within the line handler (TS) or sent from
one line-handler process to another.
Record Type : 129 DXX^PASSTHRU^MSG
REQUEST TS -> TS TSPT^REQ PassThru Init
MSGCB: %000017.021306
LINKER: #02,#0014 LISTENER: #00,#0275
P1X = %140054 P2X = %000046 P3X = %000052
P4X = %140402 P5X = %000052 P6X = %000372