SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-56
129: DXX^PASSTHRU^MSG
TSPT^REQ
is the trace-record subtype, identifying the type of passthrough message. The
subtype is one of the following:
PassThru Init
identifies the current stage of passthrough communication. The following values
can appear in this field:
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This field is for HP internal use.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
P1X = %nnnnnn P2X = %nnnnnn P3X = %nnnnnn
P4X = %nnnnnn P5X = %nnnnnn P6X = %nnnnnn
gives the values of the control fields in the MSGCB. These fields are for HP
internal use.
TSPT^REQ Passthrough initiation request
TSPT^RSP Passthrough initiation response
TSPT^DATA Passthrough data
TSPT^SON Notification of passthrough session outage
PassThru Init Initiation, or session establishment (BIND), stage
PassThru Data Data transfer stage