SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-59
171: ANYONE^TO^TS^NZERO
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the corresponding LINK
trace record.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
0000 0000 ...
if present, is the data in the LDONE message.
171: ANYONE^TO^TS^NZERO
This trace record indicates that the line handler has retrieved an incoming request from
another process, such as the service manager, via the message-system LISTEN
function. This trace record applies only to line type 58,5.
LISTEN
indicates that the message-system LISTEN function was invoked.
GETMODE
is the LISTEN parameter that determines the source of the incoming message.
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the WRITELINK or
LDONE trace record for the incoming message.
LINKER: #nn,#nnnn LISTENER: #nn,#nnnn
gives internal message-system information. These fields are for HP internal use.
172: FILRPL^TRACE^ID^NZERO
This trace record contains a message sent by the line handler to the application in the
form of a message-system WRITELINK.
04/15/96 22:57:36.104785 >000.000000 #277
Record Type : 171 ANYONE^TO^TS^NZERO
LISTEN SYSTEMSTATUS_SYSMSG_WAIT MSGCB: %000016.070104
LINKER: #00,#0022 LISTENER: #00,#0282
REQUEST CTRL :
FF6D 0001 2473 6E78 7031 2020 2020 2020! m $snxp1 ! _ >
!
2020 2020 2020 2020 2020 2020 ! !
!