SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-62
249: CLB^OUT^TRACE^ID
01:
is the link station identifier (station ID).
ReceivedText
is the CLB function: in this case, a response from the remote Synchronous Data
Link Control (SDLC) station.
A trace record with CLB function TextSent shows a reply from the CLIP indicating
that an outgoing path information unit (PIU) has been sent correctly.
Frame bytes: nn
gives the total number of bytes of data received from the CLIP.
0186 012C ...
is the data received from the CLIP. The contents are for HP internal use.
249: CLB^OUT^TRACE^ID
This trace record contains path information unit (PIU) data sent by the CIU-to-LIU bus
(CLB) to the communications line interface processor (CLIP) for the SNAX line being
traced. It applies only to line type 58,5.
01:
is the link station identifier (station ID).
SendText
is the CLB function: in this case, send text.
Frame bytes: nn
gives the total number of bytes of data sent to the CLIP.
0182 0109 ...
is the data sent to the CLIP. The contents are for HP internal use.
255: CLIP^TRACE^BLOCK
This trace record contains a block of information traced by the Communications Line
Interface Processor (CLIP) for line type 58,5 and applies only to those lines.
Record Type : 249 CLB^OUT^TRACE^ID
CLB Out 01: SendText Frame bytes: 32
0182 0109 4100 0001 0014 0001 0100 2D00 ! A - ! b
!
0000 0002 6B80 0011 0101 0500 0000 0000 ! k ! ,
!