SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-63
255: CLIP^TRACE^BLOCK
The information in this trace record is divided into a number of subrecords of various
types, representing level-1 and level-2 events occurring within the CLIP. Each
subrecord begins with a timestamp, and the data, if any, is displayed in hexadecimal,
ASCII, and EBCDIC form. The types of subrecords included depend on the selection
criteria (SELECT keywords or SELMASK bits) given in the SCF TRACE command
used to collect the trace.
The CLIP trace records are collected by the CLIP in a buffer on the controller board
and passed to the SNAX line handler only when the buffer is filled. Because these
records are collected and processed in a block, their order of appearance within a
trace, relative to trace records originating within the line handler, is not completely
chronological.