SNAX/XF and SNAX/APN Configuration and Management Manual

PTrace Reference for SNAX/XF and SNAX/APN
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
15-77
SVM 102: DXX^SEND^REQ^TRACE^ID
Matching Record Number Is: #nnnnn
if present, identifies the record number (in this trace file) of the trace record for the
corresponding message-system LISTEN. If no matching record is found,
*** Matching Record Number Not Found *** is displayed.
FFE4 13D6 ...
is the data transferred in the WRITELINK. This data is for HP internal use.
SVM 102: DXX^SEND^REQ^TRACE^ID
This trace record contains a request from the service manager to another process,
such as a line handler or a remote service manager, via the message-system LINK
function.
SVM +%00000
is a code offset for HP internal use.
LINK
indicates that the message-system LINK function was invoked.
SSCP -----> TS
identifies the source and destination of the request within SNAX. In this case, the
request is from the service manager to the line handler.
SVCTS^GM^REQ Grtng Msg Req
identifies the type of service being requested by the service manager. This
information is for HP internal use.
MSGCB: %nnnnnn.nnnnnn
gives the address of the message-system control block (MSGCB) within SNAX.
This address matches the MSGCB address displayed in the LDONE trace record
for the completion of this LINK request.
P1X = %146452 P2X = %000051 P3X = %000001
P4X = %000001 P5X = %000000 P6X = %000001
gives the values of the control fields in the MSGCB. These fields are for HP
internal use.
Record Type : 102 DXX^SEND^REQ^TRACE^ID
SVM +%00000 LINK SSCP -----> TS SVCTS^GM^REQ Grtng Msg Req
MSGCB: %000000.032532
P1X = %146452 P2X = %000051 P3X = %000001
P4X = %000001 P5X = %000000 P6X = %000001
0000 0000 0000 0000 ! !
!