SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
B-1
B
SNAX/XF and SNAX/APN BINDs
SNALU applications, SNAX/HLS, and SNAX/APC provide BIND images that SNAX/XF
or SNAX/APN forwards. For CRT, ITI, PRT, and NAM protocols, SNAX/XF or
SNAX/APN constructs the BIND image. You can configure a BIND table for custom
BINDs or use the default BINDs.
Default BIND
Table B-1 contains a summary of BIND byte numbers and default values. For more
information about the parameters, see BIND Parameters on page B-5.
Bytes 14-25
Table B-2 on page B-2 contains presentation services (PSERVIC) values for different
devices and protocols.
Table B-1. Summary of Default SNAX/XF and SNAX/APN BIND Values
Byte Value Description
0 %H31 BIND command
1 %H01 BIND type and format
2 %H03 FMPROF
3 %H03 TSPROF
4%HB1PRIPROT
5 %H90 SECPROT
6-7 %H3080
%H7080
COMPROT (SNA devices)
(6530 devices)
8 %H00 SSNDPAC
9%H00SRCVPAC
10-11 RUSIZES
12 %H00 PSNDPAC
13 %H00 reserved
14-
25
PSERVIC (see “Bytes 14-25” below)
26 %H00 ENCR
27 %H00 PLUNAME length