SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF and SNAX/APN BINDs
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
B-8
BIND Parameters
If neither PLUNAME or USERDATA is specified, then the user-data length byte
is not included in the BIND image. In this case, the last byte in the BIND image will
be byte 27 (the length of plu-name, which is %H00).
The value for user-data is specified as a hexadecimal string enclosed in
parenthesis, with a maximum length of 221 bytes. See the following examples:
USERDATA (%H40,%H54,%H41,%H4E,%H44,%H45,%H4D,%H40)
USERDATA (%HC1,%HC1,"AAAAAA", "BBBB", %HC2, %HC3)
Note that the total length of the BIND image cannot exceed 256 bytes, including
what is specified for plu-name and the command object that follows it, user-
data.