SNAX/XF and SNAX/APN Configuration and Management Manual

Error Messages
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
C-3
SNAX Error 00006SNAX Error 00006
SNAX Error 00006
Cause. A command was terminated prematurely because of a subsequent ABORT
command issued for the same object.
Effect. The command fails.
Recovery. Retry the command.
SNAX Error 00007
Cause. An SNA DISCONTACT command failed during processing of either a STOP
command for a line or PU on a primary or secondary line, or an ABORT command for
a line or PU on a secondary line.
Effect. The STOP or ABORT command fails.
Recovery. None.
SNAX Error 00009
Cause. A START PU or START LU command failed because the line to which the PU
or LU belongs was not in the STARTED state.
Effect. The PU or LU is not started.
Recovery. Start the line and retry the command.
SNAX Error 00010
Cause. A command was in error because the referenced line was not in the
STOPPED state.
Effect. The command fails.
Recovery. Stop the line and retry the command.
SNAX E-00006 Device Aborted: object-name
SNAX E-00007 DISCONTACT failed: object-name
SNAX E-00009 Line not started: object-name
SNAX E-00010 Line not stopped: object-name