APN Configuration and Management Manual

Error Messages

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

C-6

SNAX Error 00019

Cause. A DELETE LINE command failed because a trace was in progress on either

the primary or the backup line-handler process.

Effect. The line is not deleted.

Recovery. Stop the trace before deleting the line.

SNAX Error 00020

Cause. During the execution of a command, an I/O error occurred in the

communication between the service manager and the line handler. The I/O retries were

unsuccessful.

Effect. The command fails.

Recovery. Check system resources to determine why the service manager could not

communicate with the line handler; trace the service-manager process if necessary.

Correct the problem.

SNAX Error 00021

Cause. During processing of a START LINE command, the SNA ACTLINK command

failed.

Effect. The line is not started.

Recovery. Retry the command.

SNAX Error 00022

Cause. During processing of an SCF command, an SNA ADDLINKSTA command

failed. No communication existed between the service manager and the line handler.

Effect. The SCF command fails.

Recovery. Retry the command.

SNAX E-00019 Trace not stopped: object-name

SNAX E-00020 IO Retry Error: object-name

SNAX E-00021 ACTLINK failed: object-name

SNAX E-00022 ADDLINKSTA failed: object-name