SNAX/XF and SNAX/APN Configuration and Management Manual

Error Messages
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
C-7
SNAX Error 00023SNAX Error 00023
SNAX Error 00023
Cause. During processing of an SCF command, an SNA MODLINKSTA command
failed.
Effect. The SCF command fails.
Recovery. Retry the command.
SNAX Error 00025
Cause. The referenced line is inoperative. This is usually due to a hardware error
condition or a failure to receive SDLC frames from a remote SDLC station.
Effect. The command fails.
Recovery. Correct the hardware problem or activate the remote station.
SNAX Error 00026
Cause. During processing of the command, an SNA INITPROC received an error
response and the command was terminated.
Effect. The command fails.
Recovery. Retry the command.
SNAX Error 00027
Cause. The referenced LU is open.
Effect. The command fails.
Recovery. Close the LU (all application opens must be closed) and retry the
command.
SNAX E-00023 MODLINKSTA failed: object-name
SNAX E-00025 Line object-name inoperative.
SNAX E-00026 INITPROC request failed: object-name
SNAX E-00027 LU object-name is open.