APN Configuration and Management Manual

Error Messages

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

C-14

SNAX Error 00054

Cause. The value specified for the CALLADDR attribute is being used by another PU.

Effect. The command fails.

Recovery. Use a different value for the CALLADDR attribute.

SNAX Error 00055

Cause. An attempt was made to add more than 100 APPL objects per system.

Effect. The ADD command fails.

Recovery. Delete APPL objects until there are fewer than 100.

SNAX Error 00056

Cause. The user specified the same attribute for different objects, but did not specify a

unique attribute value for each of the object types. SNAX requires that some attributes

have unique values for each object in which they are specified. The name of the

attribute in which duplicate values appear is attribute-name.

Effect. The command fails.

Recovery. Specify a unique attribute value for each object. Note that some attributes

of switched lines affect the configuration of the PU attached to the line. To ensure that

the PU attached to a line is properly configured, delete the PU before altering the line

attributes. Then, when the line configuration is stable, add the PU with properly verified

PU attributes.

SNAX Error 00057

Cause. The user specified the same attribute for different objects, but did not specify a

unique attribute value for each of the object types. SNAX requires that some attributes

have unique values for each object in which they are specified.

Effect. The command fails.

SNAX E-00054 Duplicate CALLADDR

SNAX E-00055 Maximum number of APPLs reached.

SNAX E-00056 Duplicate value: attribute-name

SNAX E-00057 Duplicate resource: CPNAME, SNANETID, SNANAME

or LOCALSNANAME