SNAX/XF and SNAX/APN Configuration and Management Manual

Error Messages
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
C-16
SNAX Error 00065
Effect. The session is not stopped.
Recovery. Either reissue the STOP SESSION command with the FORCED modifier,
or issue an ABORT SESSION command.
SNAX Error 00065
Cause. The user issued an ADD LINE or ALTER LINE command to change the value
of the IOPAGES, WINDOW, MAXPUS, MAXLUS, RECSIZE, or XPAGES attribute on a
line in a MULTI-line process, but another line in the same MULTI-line process had
already been started.
Effect. The command fails.
Recovery. Stop the other line and reissue the command.
SNAX Error 00066
Cause. The user attempted to use SNAX/APN functionality, but the SNAX/APN
product does not exist on this system.
Effect. The command fails.
Recovery. Install the SNAX/APN product.
SNAX Error 00068
Cause. In an ADD or ALTER command, the user specified an attribute that was not
valid for the line subtype.
Effect. The command fails.
Recovery. Eliminate the invalid attribute and retry the command.
SNAX E-00065 Rejected, another LINE on a MULTI process is
STARTED
SNAX E-00066 SNAX/APN function NOT installed.
SNAXXF E-00068 Invalid attribute for line subtype:
attribute-name