APN Configuration and Management Manual

Error Messages

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

C-22

SNAX Error 00102

Cause. The user attempted to add a switched floating LU to a SNAX/APN PU.

Effect. The ADD LU command fails.

Recovery. None. Switched floating LUs are not supported by SNAX/APN.

SNAX Error 00103

Cause. An ADD or ALTER command was issued for an LU subordinate to a

SNAX/APN line with PROTOCOL ITI, CRT or SNALU and the LOCALSNANAME

attribute was not specified.

Effect. The ADD or ALTER command fails.

Recovery. Specify LOCALSNANAME when configuring SNAX/APN LUs with

PROTOCOL values of ITI, CRT or SNALU.

SNAX Error 00104

Cause. The user specified the REGISTER attribute when the LU is either a remote LU

or a local LU whose PROTOCOL is not ITI, CRT, or SNALU.

Effect. The command fails.

Recovery. The only LUs that can be registered are:



LUs with PROTOCOL ITI, CRT, or SNALU



Local LUs with PROTOCOL SNALUXS

SNAX Error 00109

Cause. The error occurs when using multiple service managers if the line was already

added to a different service manager.

Effect. The command fails.

SNAX E-00102 SNAX/APN does not support floating LUs.

SNAX E-00103 LOCALSNANAME is a required attribute.

SNAX E-00104 LU must be local or PROTOCOL ITI/CRT/SNALU to be

registered

SNAX E-00109 Object \system-name.$object-name

already added to Service Manager

\system-name.$service-manager-name