APN Configuration and Management Manual

Error Messages

SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006

C-24

SNAX Error 00113

Cause. The object name specified must not be #ZNT21, #ZAPC21, or #ZRCPnn.

Effect. The command fails.

Recovery. Specify another name for the object.

SNAX Error 00114

Cause. The CPNAME of the remote PU is the same as our CPNAME.

Effect. The command fails.

Recovery. Specify a different CPNAME for the remote PU.

SNAX Error 00115

Cause. The NODETYPE must be LEN or EN when the APPN attribute is YES.

Effect. The command fails.

Recovery. Change the NODETYPE or APPN to correct the problem.

SNAX Error 00116

Cause. There are APPN PUs and LUs defined.

Effect. The command fails.

Recovery. Delete the APPN resources or do not reset the APPN attribute.

SNAX Error 00117

Cause. MAXLOCALLUS <> 0 and APPN = NO.

Effect. The command fails.

SNAX E-00113 The object name specified is a reserved name.

SNAX E-00114 The CPNAME on the remote PU must be unique.

SNAX E-00115 The APPN attribute is incompatible with the

NODETYPE of SUBSYS.

SNAX E-00116 APPN resources are defined, can’t change APPN

attribute to NO.

SNAX E-00117 MAXLOCALLUS attribute is incompatible with the

APPN attribute.