SNAX/XF and SNAX/APN Configuration and Management Manual

Error Messages
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
C-27
SNAX Error 00501SNAX Error 00501
Recovery. Reissue the command without the duplicate attribute.
SNAX Error 00501
Cause. One of the modifiers entered in a command was a duplicate. The name of the
modifier that was duplicated is modifier-name.
Effect. The command fails.
Recovery. Reissue the command without the duplicate modifier.
SNAX Error 00502
Cause. An internal error occurred because of an unexpected value.
Effect. The command fails.
Recovery. None; note the specifics of the command being issued and contact your
support provider.
SNAX Error 00503
Cause. The number specified in the command was not within the allowed range of
values.
Effect. The command fails.
Recovery. Correct the attribute value and reissue the command.
SNAX Error 00504
Cause. The value entered was not valid for the attribute.
Effect. The command fails.
Recovery. Check the allowed values for the attribute and reissue the command with
an appropriate value.
SNAX E-00501 Duplicate modifier modifier-name
SNAX E-00502 Internal error: Case out of range
SNAX E-00503 Input out of range, must be between number
and number.
SNAX E-00504 Input value invalid.