SNAX/XF and SNAX/APN Configuration and Management Manual

WAN Subsystem Objects for SNAX Processes
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
2-4
Configuring WAN Subsystem Objects for SNAX
Figure 2-2. Configuring WAN Subsystem Objects for SNAX
SNAX
Service Manager
$SSCP
SNAX Line Handler
$SNAP1
WAN Manager
$ZZWAN
NonStopSystem
WAN Subsystem SCF Configuration (Cont.)
ADD DEVICE $ZZWAN.#SNAP1
, TYPE (58,5)
, PROF TSPROF
, IOPOBJECT $SYSTEM.SYS00.SNATSOBJ
, CPU 2
, ALTCPU 3
, RECSIZE 128
, CLIP 3
, LINE 2
, ADAPTER SWAN001A
, PATH B
==SNAX-specific attribute changes
, COUNTRY 44
, L1RETRY 5
, NT21BPAGES 160
, REJ
START DEVICE $ZZWAN.#SNAP1
ADD DEVICE $ZZWAN.#SOXP1
, TYPE (58,3)
, PROF TSPROF
, IOPOBJECT $SYSTEM.SYS00.SNATSOBJ
, CPU 2
, ALTCPU 3
, RECSIZE 128
START DEVICE $ZZWAN.#SOXP1
WAN
Subsystem
Objects
SWAN Concentrator
SNAX Line Handler
$SOXP1
$SNAP1 X.25 Line
WAN Subsystem SCF Configuration
ADD PROFILE $ZZWAN.#SMPROF
, FILE $SYSTEM.SYS00.PSX1SVM
ADD PROFILE $ZZWAN.#TSPROF
, FILE $SYSTEM.CSS00.PSX1TS
ADD DEVICE $ZZWAN.#SSCP
, TYPE (13,5)
, PROF SMPROF
, IOPOBJECT $SYSTEM.SYS00.SVMOBJ
, CPU 2
, ALTCPU 3
, RECSIZE 256
==SNAX-specific attribute changes
, EXTPOOLPAGES 1000
, NUMSEGIDS 5
, SETTABNAME MYSET
START DEVICE $ZZWAN.#SSCP
START SUBSYS $ZZWAN.#SSCP
VST202.vsd