SNAX/XF and SNAX/APN Configuration and Management Manual

Index
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
Index-18
P
OS/2 (continued)
description of 6-10
OUT
option, DIALTYPE attribute 14-21
Outbound message from service manager,
trace record for 15-71, 15-72, 15-73, 15-75
Outgoing data to X25AM, trace record
for 15-44
Outgoing LCAN, trace records for 15-39
Outgoing reply from service manager
trace record for 15-74, 15-76
tracing 13-141
Outgoing request
from service manager
trace record for 15-77
tracing 13-141, 13-146
Output destinations, for SCF 11-10
Owner, subsystem 11-7
P
PAGES option, TRACE command 13-132
example 13-145
setting 13-143
Parallel sessions 6-1
Parameters, in SCF commands 11-8
DETAIL 11-8
SEL 11-9
SUB 11-8
Partner 2.1 nodes 6-8
Partner LU in session, information
about 13-120
Passthrough
configuration 5-3
control, in SNAX/XF architecture 15-6
description of 1-9, 5-1
incoming message, trace record
for 15-55
mode, status of line 13-97, 13-99
multiple service managers 13-79
outgoing message, trace record
for 15-53
Passthrough (continued)
reducing configuration time 13-15
sessions
allowing in LUs 14-40
maximum number of
concurrent 14-34
static mode 14-63
PASSTHRU attribute 14-40
Password
connection identifier for X.25
lines 14-16
for applications 14-40
PASSWORD attribute 14-40, 14-41
Path
assignment for line 13-100
between PU and X25AM subdevice,
trace records for
breaking 15-48
establishing 15-47
Path control 15-5
PATH object
Ethernet path 2-1
Peripheral node LU session initiation A-5
Permanent virtual circuits
X25AM 14-65
X.25 PVC 3-3
Permanently subordinated PUs and LUs,
obtaining counts of 13-92
Permanently-subordinated PU and LU
objects
switched floating PUs and LUs 13-9
switched line 3-5
valid LU names 12-6
valid PU names 12-8
Physical control 15-5
Physical unit
See PU objects
PIU I/O
statistics of 13-86
, 13-87, 13-90, 13-91
trace records for
PIU In 15-21