SNAX/XF and SNAX/APN Configuration and Management Manual

SNAX/XF Primary Lines
SNAX/XF and SNAX/APN Configuration and Management Manual—425836-006
3-3
Primary Line Using an X.25 PVC
Primary Line Using an X.25 PVC
Figure 3-2 shows an example of a primary line using an X.25 PVC. The SCF
configuration, shown alongside, configures the X25AM LINE and SU object
(representing a PVC) and the SNAX/XF LINE, PU, and LU objects.
Figure 3-2. Primary Line Using an X.25 PVC
Notes.
1. The X25AM LINE object must be altered to allocate some PVCs.
2. The X25AM SU must have PROTOCOL QLLC, DEVTYPE (58,20), and a PVC number.
3. The ASSOCIATESUBDEV attribute links the SNAX PU object with the PVC (SU object).
4. You must start the X25AM line before the SNAX line.
5. For details of the SCF attributes for X25AM, see the SCF Reference Manual for X25AM.
$SSCP
$SNAP2
NonStop System
SWAN Concentrator
X.25 Network
SNAX/XF
Line Handler
X25AM Line
Handler
X25AM Line ($X25A)
X25AM SCF Configuration
ALTER LINE $X25A
, PVCRANGE (1,10)
, SVCRANGE (15,50)
ADD SU $X25A.#SU1
, PROTOCOL QLLC
, DEVTYPE (58,20)
, RECSIZE 80
, PVC 1
SNAX/XF SCF Configuration
ADD LINE $SNAP2
ADD PU $SNAP2.#PU1
, ADDRESS %HC6
, MAXLUS 1
, TYPE (13,2)
, RECSIZE 256
, ASSOCIATESUBDEV $X25A.#SU1
ADD LU $SNAP2.#LU1
, TYPE(14,2)
, PUNAME #PU1
, DEVTYPE “3278-2"
, RECSIZE 1920
, PROTOCOL CRT
, ADDRESS 1
START LINE $X25A, SUB ALL
START LINE $SNAP2, SUB ALL
PU
LU
$X25A
SU
SNA Peripheral Node
VST302.vsd